DPI52S190J12 VOLTAGE DIP PROOFING INVERTER ( DPI )

120 VAC INPUT 500VA OUTPUT

Designed to provide reliable maintenance-free AC control power to

 critical loads during voltage sags & dips.

Handles inductive and low power factor loads.

SEMI F47 Compliant

AC INPUT

 

 

 

 

 

 

 

    Single Phase supply voltage

 

 

120Vac 50/60Hz

 

 

 

    Maximum input voltage

 

 

+10%

 

 

 

 

    Full load current

 

 

4.2A

 

 

 

 

STATIC SWITCH

 

 

 

 

 

 

 

    Nominal off-state voltage

 

 

150Vac RMS

 

 

 

    Peak off-state voltage

 

 

800V

 

 

 

 

    Nominal current (AV)

 

 

4.2A

 

 

 

 

    Short time overload current (<100ms)

 

 

26A

 

 

 

 

    Non-repetitive peak on-state current (10ms)

 

 

26A

 

 

 

 

INVERTER

 

 

 

 

 

 

 

    Nominal output voltage

 

 

120Vac RMS

 

 

 

    Voltage fluctuations over full operating range

 

 

-15% to +10%

 

 

 

    Nominal load current

 

 

4.2A

 

 

 

 

    Power factor range

 

 

cos Ф from 1 to 0

 

 

 

    Wave shape

 

 

Stepped square

 

 

 

    Nominal inductive load

 

 

500VA

 

 

 

 

    Storage capacitors (rated 200Vdc)

 

 

0.0264F

 

 

 

 

    Usable stored energy factor ( η )

 

 

0.36

 

 

 

 

    Minimum up time as function of load

 

 

t=( η * Ccap *Vsupply) / Lload * Фcos )

 

    Transistor peak current limit

 

 

26A

 

 

 

 

    Output frequency

 

 

50/60Hz ±1%

 

 

 

    HBC fuse rating

 

 

16A

 

 

 

 

TIMER

 

 

 

 

 

 

 

    Range

 

 

0.1 to 3.1s

 

 

 

 

    Setting

 

 

0.1 steps

 

 

 

 

    Maximum recovery time of capacitors to 1,27Vin

 

 

<1.5 second

 

 

 

 

INDICATORS

 

 

 

 

 

 

 

    System OK

 

 

green LED

 

 

 

 

    Compensator Running

 

 

red LED

 

 

 

 

TEMPERATURE

 

 

 

 

 

 

 

    Maximum ambient working temperature

 

 

45°C (113°F)

 

 

 

CUBICLE

 

 

 

 

 

 

 

    Construction

 

 

Extruded aluminum

 

 

 

    Height( Dim. L3 on P9)

 

 

379mm(15.16in)

 

 

 

    Width

 

 

150mm (5.90 in)

 

 

 

    Depth

 

 

110mm (4.33in)

 

 

 

    Mass

 

 

4.3 kg (9.5 lbs)

 

 

 

CONNECTION

 

 

 

 

 

 

 

    Cable

 

 

2mm² (14 AWG) copper panel wire

 

    Screw-terminal torque

 

 

0.6 - 0.8 Nm (5.2-7.0.lb-in)

 

 

LISTINGS

 

 

 

 

 

 

 

    Underwriters Laboratories Inc.

 

 

UL listed, Control# 37WJ / File# E205817

 

 

 

 

 

 

 

 

 

www.jimdgrayassoc.com