DPI52L1663J12 VOLTAGE DIP PROOFING INVERTER ( DPI )

120 VAC INPUT 3KVA OUTPUT

Designed to provide reliable maintenance-free AC control power to

 critical loads during voltage sags & dips.

Handles inductive and low power factor loads.

SEMI F47 Compliant

AC INPUT

 

 

 

 

 

 

 

    Single Phase supply voltage

 

 

120Vac 50/60Hz

 

 

 

    Maximum input voltage

 

 

+10%

 

 

 

 

    Full load current

 

 

25A

 

 

 

 

STATIC SWITCH

 

 

 

 

 

 

 

    Nominal off-state voltage

 

 

150Vac RMS

 

 

 

    Peak off-state voltage

 

 

800V

 

 

 

 

    Nominal current (AV)

 

 

25A

 

 

 

 

    Short time overload current (<100ms)

 

 

60A

 

 

 

 

    Non-repetitive peak on-state current (10ms)

 

 

130A

 

 

 

 

INVERTER

 

 

 

 

 

 

 

    Nominal output voltage

 

 

120Vac RMS

 

 

 

    Voltage fluctuations over full operating range

 

 

-15% to +10%

 

 

 

    Nominal load current

 

 

25A

 

 

 

 

    Power factor range

 

 

cos Ф from 1 to 0

 

 

 

    Wave shape

 

 

Stepped square

 

 

 

    Nominal inductive load

 

 

3KVA

 

 

 

 

    Storage capacitors (rated 200Vdc)

 

 

0.231F

 

 

 

 

    Usable stored energy factor ( η )

 

 

0.39

 

 

 

 

    Minimum up time as function of load

 

 

t=( η * Ccap *Vsupply) / Lload * Фcos )

 

    Transistor peak current limit

 

 

50A

 

 

 

 

    Output frequency

 

 

50/60Hz ±1%

 

 

 

    HBC fuse rating

 

 

32A

 

 

 

 

TIMER

 

 

 

 

 

 

 

    Range

 

 

0.1 to 3.1s

 

 

 

 

    Setting

 

 

0.1 steps

 

 

 

 

    Maximum recovery time of capacitors to 1,27Vin

 

 

<3.4 second

 

 

 

 

INDICATORS

 

 

 

 

 

 

 

    System OK

 

 

green LED

 

 

 

 

    Compensator Running

 

 

red LED

 

 

 

 

TEMPERATURE

 

 

 

 

 

 

 

    Maximum ambient working temperature

 

 

45°C (113°F)

 

 

 

CUBICLE

 

 

 

 

 

 

 

    Construction

 

 

Extruded aluminum

 

 

 

    Height( Dim. L3 on P16)

 

 

644mm(25.76 in)

 

 

 

    Width

 

 

311mm (12.24 in)

 

 

 

    Depth

 

 

162mm (6.38 in)

 

 

 

    Mass

 

 

20.6 kg (45.32 lbs)

 

 

 

CONNECTION

 

 

 

 

 

 

 

    Cable

 

 

5mm² (10 AWG) copper panel wire

 

    Screw-terminal torque

 

 

1.5 - 1.8 Nm (13-16.lb-in)

 

 

LISTINGS

 

 

 

 

 

 

 

    Underwriters Laboratories Inc.

 

 

UL listed, Control# 37WJ / File# E205817

 

 

 

 

 

 

 

 

 

www.jimdgrayassoc.com